Bootsplash HOWTO. 리눅스 콘솔에 배경 그림을 띄우자.

# mv linux-2.4.20.tar.bz2 /usr/src
# mv bootsplash-3.0.7-2.4.20-vanilla.diff /usr/src
# cd /usr/src
/usr/src# tar vjxf linux-2.4.20.tar.bz2         bz2압축을 풀려면 bunzip2 패키지가 필요하다.
/usr/src# ln -s linux-2.4.20 linux              압축이 풀린 디렉토리를 linux라는 이름으로 심볼릭 링크를 생성한다.
/usr/src# cd linux
/usr/src/linux# patch -p1 < ../bootsplash-3.0.7-2.4.20-vanilla.diff

# mkdir /etc/bootsplash
# tar vjxf Theme-Linux.tar.bz2
# cd Linux
Linux# cp images/* /etc/bootsplash
Linux# cp config/* /etc/bootsplash

# This is the configuration file for the 1024x768 bootsplash picture.
#
# This file is necessary to specify the coordinates of the text box on
# the splash screen.
#
# Comments are welcome by stepan@suse.de

# config file version
version=3

# should the picture be displayed?
state=1

# fgcolor is the text forground color.
# bgcolor is the text background (i.e. transparent) color.
fgcolor=7
bgcolor=0

# (tx, ty) are the (x, y) coordinates of the text window in pixels.
# tw/th is the width/height of the text window in pixels.
tx=0
ty=0
tw=1024
th=768

# name of the picture file (full path recommended)
jpeg=/etc/bootsplash/bootsplash-1024x768.jpg       # images디렉토리에 있던 그림파일. 
silentjpeg=/etc/bootsplash/silent-1024x768.jpg     # images디렉토리에 있던 그림파일 slient 그림파일에 대해서는 아래에 설명하겠다.
                                                   # /etc/bootsplash에 그림파일을 복사 했으므로 왼쪽과 같이 수정한다.
progress_enable=1

# background
box silent noover 204 666 820 686 #515151
box silent inter  204 666 204 686 #b77200 #f2b700 #b77200 #f2b700
box silent        204 666 820 686 #b77200 #f2b700 #b77200 #f2b700
#box silent inter  204 666 204 686 #f2b700 #b77200 #b77200 #f2b700
#box silent        204 666 820 686 #f2b700 #b77200 #b77200 #f2b700


# black border
box silent         204 665 820 665 #b5b5b5
box silent         204 687 820 687 #b5b5b5
box silent         203 665 203 687 #b5b5b5
box silent         820 665 820 687 #b5b5b5


overpaintok=1

# cd /etc/bootsplash
/etc/bootsplash# splash -s -f bootsplash-1024x768.cfg > /boot/initrd-1024x768

#! /bin/bash
# Copyright (c) 1995-2000 SuSE GmbH Nuernberg, Germany.
#
# Author: Michael Schroeder <feedback@suse.de>
#
# /etc/init.d/splash
# /usr/sbin/rcsplash
#
# System startup script for console splash screens
#
### BEGIN INIT INFO
# Provides: splash
# Required-Start: $remote_fs
# X-UnitedLinux-Should-Start: fbset
# Required-Stop:
# Default-Start:  1 2 3 5 S
# Default-Stop:
# Description:    Splash screen setup
### END INIT INFO

# Source SuSE config
#. /etc/rc.status                         # 수세 리눅스에서 사용하는 파일이다 주석처리 한다

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num><num>
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status

# First reset status of this service
#rc_reset                                  # 수세 리눅스에서 사용하는 명령. 주석처리 한다.

# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - insufficient privilege
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signalling is not supported) are
# considered a success.

test -f /proc/splash || exit 5

case "$1" in
    start)
	test -x /sbin/splash || exit 5
	splashv=`cat /proc/splash`
	res="${splashv##*, }"
	test "$splashv" != "$res" || exit 5
	res="${res%)*}"
	startstr="Setting up splash screens ($res):"
	for splcfg in /etc/bootsplash/vtsplash-[0-9]-$res.cfg /etc/bootsplash/vtsplash-[0-9][0-9]-$res.cfg; do
		test -f $splcfg || continue
		spljpg="${splcfg%.cfg}.jpg"
		test -f $spljpg || continue
		test -n "$startstr" && echo -n "$startstr"
		startstr=
		unit="${splcfg#/etc/bootsplash/vtsplash-}"
		unit="${unit%%-*}"
		/sbin/splash -s -u "$unit" "$splcfg"
		echo -n " $unit"
	done
	#test -z "$startstr" && rc_status -v  # 수세 리눅스에서 사용하는 명령. 주석처리 한다.
	;;
    stop)
	;;
    try-restart)
	## Stop the service and if this succeeds (i.e. the 
	## service was running before), start it again.
	## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
	$0 status >/dev/null &&  $0 restart

	# Remember status and be quiet
	#rc_status    # 수세 리눅스에서 사용하는 명령. 주석처리 한다.
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 start

	# Remember status and be quiet
	#rc_status     # 수세 리눅스에서 사용하는 명령. 주석처리 한다.
	;;
    force-reload)
	## Signal the daemon to reload its config. Most daemons
	## do this on signal 1 (SIGHUP).
	## If it does not support it, restart.
	$0 try-restart
	#rc_status      # 수세 리눅스에서 사용하는 명령. 주석처리 한다.
	;;
    reload)
	$0 try-restart
	#rc_status      # 수세 리눅스에서 사용하는 명령. 주석처리 한다.
	;;
    status)
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
	exit 1
	;;
esac
#rc_exit                 # 수세 리눅스에서 사용하는 명령. 주석처리 한다.

# cd /etc/bootsplash
/etc/bootsplash# cp bootsplash-1024x768.cfg vtsplash-0-1024x768.cfg
/etc/bootsplash# cp bootsplash-1024x768.jpg vtsplash-0-1024x768.jpg

# This is the configuration file for the 1024x768 bootsplash picture.
#
# This file is necessary to specify the coordinates of the text box on
# the splash screen.
#
# Comments are welcome by stepan@suse.de

# config file version
version=3

# should the picture be displayed?
state=1

# fgcolor is the text forground color.
# bgcolor is the text background (i.e. transparent) color.
fgcolor=7
bgcolor=0

# (tx, ty) are the (x, y) coordinates of the text window in pixels.
# tw/th is the width/height of the text window in pixels.
tx=0
ty=0
tw=1024
th=768

# name of the picture file (full path recommended)
#jpeg=/etc/bootsplash/bootsplash-1024x768.jpg        
#silentjpeg=/etc/bootsplash/silent-1024x768.jpg 
# 위의 파일들은 주석처리 한다. vtsplash-0-1024x768.jpg로 그림파일의 이름을 vtsplash-0-1024x768.cfg 와 함께
# 똑같이 맞추어 주었기 때문에 위의 설정은 반영되지 않는다.

progress_enable=1

# background
box silent noover 204 666 820 686 #515151
box silent inter  204 666 204 686 #b77200 #f2b700 #b77200 #f2b700
box silent        204 666 820 686 #b77200 #f2b700 #b77200 #f2b700
#box silent inter  204 666 204 686 #f2b700 #b77200 #b77200 #f2b700
#box silent        204 666 820 686 #f2b700 #b77200 #b77200 #f2b700

# black border
box silent         204 665 820 665 #b5b5b5
box silent         204 687 820 687 #b5b5b5
box silent         203 665 203 687 #b5b5b5
box silent         820 665 820 687 #b5b5b5


overpaintok=1

    | 640x480  800x600  1024x768 1280x1024
----+-------------------------------------
256 |  0x301    0x303    0x305    0x307
32k |  0x310    0x313    0x316    0x319
64k |  0x311    0x314    0x317    0x31A
16M |  0x312    0x315    0x318    0x31B